Friday, May 24, 2019

FJZP-200 Laser Concrete Screed

Chinacoal08
Application:
Mainly used in large area concrete construction, such as large workshop, airport, the plaza and so on.

Features:
1.Used high accuracy laser device, close loop control technology and precision integrated hydraulic system, and microcomputer automatic control.
2.Screed assembly is hydraulic controlled. Integrated with laser system and computer control system, the machine will self-level and finish the screeding work with high efficiency.
3.The laser transmitter which measures the elevation is independent located, so there is no worry about the accumulative error. Compared with the traditional wy, the construction joints will be greatly reduced, so the maintenance cost and slab use will be down greatly.
4.The flat and dual slope can be fully automatic controlled by the transmitter. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used.
5.The forward-seated operation can widen operator vision, reduce the labor intensity and improve working efficiency.
6.Steering, forward and reverse of the machine are all controlled by the integrated handles. Operation buttons and controller which are located on the one side of th seat, is user-friendly.

Technical Parameter:
Model
FJZP-200
Engine
Leveling System
Engine Model
Honda GX630, Electric Start
Width
2500mm
Type
Gasoline Engine,
Paving Mode
Paving Auger
OHV, double cylindrer
Power
20HP/3600rpm
Power Auger
High Torque
Hydraulic Motor
Fuel Tank Capacity
40L
Centrifugal Force
500N
Lubricant
1.5L
Vibration Frequency
50Hz
Fuel Consumption
313g/kWh
Screed Head Type
Fixed
Travel System
Screed Plate Height
330mm
Drive
Hydraulic motor,
Paving Depth
30-200mm
Four-wheel drive
Wheel
Solid puncture proof tyre
Translational Range
500mm
Speed
0-70m/min
Operation
Laser Control
Forward,
Handle Control, CVT
Backward
Control
Microcomputer
Steering
Hydraulic Control
Laser scanning
Control Effect
Plane, slope or dual slope
Cleaning System
(three-dimensional)
Dimensions and Weight
Power
Hydraulic Motor
Dimensions
2554*2500*2360mm
Theoretical Flow
20L/min
Weight
1080kg
Rated Pressure
7MPa

No comments:

Post a Comment

Infolinks